Office Building Flexible Movable Sliding Sound Proof Partition
Sound proof partition detail
Suspension System
Suspension Tracks: Each sound proof partition panel is suspended on one 4-wheel ball-bearing trolley or two multi-directional polymer trolleys. The individual panel is adjustable in height without the opening of the ceiling or panel.
Carriers: Trolley system as required for configuration type, size, and weight of partition and for easy operation; with ball-bearing wheels.
Multidirectional Carriers: Capable of negotiating 90-degree L, T, and X intersections without track switches.
Track Intersections, Switches, and Accessories: As required for type of operation, storage, track configuration, and layout indicated for operable panel partitions, and compatible with partition assembly specified. Fabricate sound proof partition track intersections and switches from steel or aluminum.
Aluminum Finish: Manufacturer's standard, factory-applied, decorative finish, unless otherwise indicated.
Installation
Install sound proof partition and accessories after other finishing operations, including painting, have been completed.
Install sound proof partition panels from marked packages in numbered sequence indicated on Shop Drawings.
Broken, cracked, chipped, deformed, or unmatched panels are not acceptable.
General: Comply with operable panel partition manufacturer's written installation instructions.
Adjusting
Adjust sound proof partitions to operate smoothly, without warping or binding.
Lubricate hardware and other moving parts.
Adjust sound proof partitions to operate smoothly and easily, without binding or warping.
Check and readjust operating hardware.
Confirm that latches and locks engage accurately and securely without forcing or binding.
Technical Information
| Series | Model 65 | Model 85 | Model 100 |
| Panel suspension | Top hung only | Top hung only | Top hung only |
| Panel thickness | 65 mm | 85 mm | 100 mm |
| Max height | 4000 mm | 6000 mm | 8000 mm |
| Panel width | 600-1230 mm | 600-1230 mm | 600-1230 mm |
| Based board thickness | 9 mm | 9 mm | 9 mm |
| Pass doors selection | Single Door or Double Door |
| Sound insulation | 20 – 32 db | 28 – 36 db | 32 – 50 db |
| Finish Material | Plywood / MDF /Laminate / Melamine / Gypsum |
| Board / Fabric / Insulation / Fireproof /Wall Paper /Vinyl /Painting /etc,(Customized) |
How to maintain the sound proof partitions
First of all: cleaning of sound proof partition
In hotel rooms, multi-function halls, meeting rooms, large banquets and other areas, such sound proof partitions are widely used. It is inevitable that some food, drinks, etc. will be spilled on the sound proof partitions. If the surface is soiled, It is necessary to use professional cleaning, you can use some alkaline water and alkaline washing liquid to clean the dirt on the partition. It is also possible to use industrial sodium hydroxide to lightly coat the decorative surface of the movable sound proof partition, and wash it with water after half an hour. At the same time, you can apply some vinegar to the oily area, wipe it evenly on the surface of the movable partition, let him absorb it slowly, and then wash it with clean water.
Second: Sound proof partition maintenance
At the same time of sound proof partition, pay attention to keep away from some flammable dangerous goods as much as possible, because some partition surfaces are made of soft packages, hard packages, etc., which are prone to safety hazards when encountering open flames. In the process of using the movable sound proof partition, if the top hanging wheel is damaged, the telescopic component fails or cannot be pushed, the parts are loose, etc., try not to dismantle it privately. Professional maintenance personnel should be notified to solve the problem. At the same time, we will visit from time to time. Do maintenance, let you use it at ease, let your space be separated as you want, and divided as you want.
Product Tags:
|
|
Office Building Flexible Movable Sliding Sound Proof Partition Images
|
